IOI Technology Corp. Blog

• Compliant with PCI Express Base Specification Revision 2.0
• Supports PCI Express Card Electromechanical Specification Revision 2.0
• Host Bus: PCIe x1 Gen 2 (5.0 Gb/s)
• Compliant with Universal Serial Bus 3.0 specification Revision 1.0
• Compliant with Intel’s eXtensible Host Controller Interface (xHCI) specification Revision 1.0
• Four independent USB 3.0 Host Ports

More info: http://www.ioi.com.tw/products/proddetail.aspx?CatID=106&DeviceID=3021&HostID=2035&ProdID=1060142

• Supports PCI Express Specification Revision 2.1 at 5GT/s
• Single (x1) PCI Express Lane
• Compliant with USB 3.0 Specification 1.0
• Compliant with Extensible Host Controller Interface (xHCI) Specification revision 1.0
• 4 downstream USB ports support SS/HS/FS/LS data rates (5Gbps/480Mbps/12Mbps/1.5 Mbps)
• GoXtream™ Architecture
  • Switching fabric to sustain full bandwidth simultaneously for each USB3.0 port
  • No firmware necessary
• WHQL certified driver supports Window 7, Vista and XP, as well as Linux
• Supports USB 3.0 A Plug w/Jackscrew lock Cable

More info: http://www.ioi.com.tw/products/proddetail.aspx?CatID=106&DeviceID=3021&HostID=2035&ProdID=1060144

1394b Long-Haul Cable (40m) Beta plug to Beta plug with Jackscrew on Both Ends

The 1394b Long-Haul Cable (CB-00539) integrated two coax transceivers and is designed to simultaneously transmit and receive signals on a single 75Ω coax cable, extending your signal an additional 40 meters. It’s easy to setup and there is no configuration necessary, like all IEEE1394 compliant hardware.

The 1394b Long-Haul Cable (CB-00539) is ideally suited for IEEE 1394b-2002 connections over 75Ω coax cable at S800 data rate as specified in the 1394 TA Baseband Coax PMD Specification. It can also be used at S400, S200 and S100 data rates. The 1394b Long-Haul Cable connects seamlessly to any IEEE 1394b-2002 compliant physical layer controller (PHY). For correct operation the signals must be NRZ (non-return-to-zero) encoded, DC balanced with a maximum run length of 10 bits, and have a speed (edge rate) of between 100Mbps and 1.25Gbps.

This 1394b Long-Haul Cable (CB-00539) is useful and economical solution for the Machine Vision, Surveillance and FireWire Storage market.

More Info about CB-00539 on
http://www.ioi.com.tw/products/proddetail.aspx?CatID=102&HostID=2009&Cable_HostID=4007&ProdID=1020110

Highlights

• One USB 3.0 Host Port
• Compliant with Universal Serial Bus 3.0 specification
• ExpressCard/34mm standard Size (75×34x5mm)
• Designed with Renesas uPD720200A (USB3.0 Certified TID: 380000013)

• 3U 19-inch rack mount chassis
• Enables a desktop computer to control up to eight PCI Express x1 slots from a single PCI Express x8 or x16 slot.
• Upstream PCIe: PCIe x8 (Dual Quad-lane External PCIe Connector)
• Downstream PCIe: Eight (half-length) 1-lane PCI Express HBA (Host Bus Adapter)
• High-performance, non-blocking internal architecture
• Supports PCIe Gen 1 and PCIe Gen 2 transfer rates
  • PCIe Gen 1: 2.5 Gbps per Lane
  • PCIe Gen 2: 5.0 Gbps per Lane
• Standards compliant with PCIe Base Specification 2.0 and backwards compatible with PCIe 1.0/1.1
• Standards compliant with PCI Power Management Specification 1.2
• Supports Spread-Spectrum Clock (QoS) isolation
• QoS (Quality of Service) features include 2 virtual channels (VC) and 8 traffic classes per port
• Supplies 3.3V, 3.3Vaux & 12V power to PCI Express HBA
• Built-in 220W AC ( 115-230V, 50-60Hz)  to DC Switching Power Adapter

Highlights

• Supports PCI Express Specification Revision 2.1 at 5GT/s
• Single (x1) PCI Express Lane
• Compliant with USB 3.0 Specification 1.0
• Compliant with Extensible Host Controller Interface (xHCI) Specification revision 1.0
• Two downstream USB ports support SS/HS/FS/LS data rates (5Gbps/480Mbps/12Mbps/1.5 Mbps)
• GoXtream™ Architecture
  • Switching fabric to sustain full bandwidth simultaneously for each USB3.0 port
  • No firmware necessary
• WHQL certified driver supports Window 7, Vista and XP, as well as Linux
• Supports USB 3.0 A Plug w/Jackscrew lock Cable
• Low Profile PCI Form Factor

Highlights

• The size of 1U 19-inch rack mount chassis
• Multiple transaction translator (MTT)
  • One TT per downstream port for maximum performance
• Provides 16 CDP (Charging Downstream Port)
• Provides multiple modes of charging to meet the following specifications:
  • USB Battery Charger 1.2 Spec (Primary detection only for CDP)
  • USB Battery Charger 1.0/1.1 Spec
  • Chinese Telecommunications Industry Standard YD/T 1591-2009
  • Divider Mode, compliant with Apple devices such as iPod® and iPhone®
• Built-in 300W AC (115-230V, 63-47Hz) to DC Switching Power Adapter. (PS-00040)

External PCIe x4 Cable (38pin to 38pin)

Model No.        AWG Length (Passive) Performance

CB-00485       28AWG 1.5m         Gen2
CB-00485-01  28AWG 1m            Gen2
CB-00485-02  28AWG 2.0m         Gen2
CB-00485-03  28AWG 3.0m         Gen1
CB-00485-04  28AWG 0.5m         Gen2
CB-00518-01  26AWG 3.0m         Gen2
CB-00518-02  26AWG 4.0m         Gen1
CB-00518-03  26AWG 5.0m         Gen1

Highlights

• Only half the size of 2U 19-inch rack mount chassis
• Enables a desktop computer to control up to four PCI Express x1 slots from a single PCI Express x4, x8 or x16 slot.
• Provides Standard External PCI Express 38 pin Interface
• High-performance, non-blocking internal architecture
• Supports four (half-length Low Profile form factor) 1-lane PCI Express HBA (Host Bus Adapter)
• Supports PCIe Gen 1 and PCIe Gen 2 transfer rates
  • PCIe Gen 1: 2.5 Gbps per Lane
  • PCIe Gen 2: 5.0 Gbps per Lane
• Standards compliant with PCIe Base Specification 2.0 and backwards compatible with PCIe 1.0/1.1
• Standards compliant with PCI Power Management Specification 1.2
• QoS (Quality of Service) features include 2 virtual channels (VC) and 8 traffic classes per port
• Supplies 3.3V, 3.3Vaux & 12V power to PCI Express HBA
• Built-in 220W AC ( 115-230V, 50-60Hz)  to DC Switching Power Adapter

more information: http://www.ioi.com.tw/products/proddetail.aspx?CatID=113&DeviceID=3021&HostID=2041&ProdID=1130007